Products

General Industries

The company packages and supplies a variety of products used in pressure-related equipment and boilers used in facilities for the manufacturing
of steel, paper, HRSG and ship.



  • jsv-lt12

    +
    JTC-PF11

    This is a large capacity pilot type temperature control valve. It has a larger capacity compared to the direct impingement type and can be used in places where here is a big difference in pressure before and after the valve. It is fit for temperature control of large storage tanks, and is also used in hot water tanks or thermal exchangers. The range of temperature adjustment is categorized by 20℃ and there is very little variance in temperature. Installation is also very simple as it does not require an auxiliary power source such as electricity. The connecting pipe is covered with a flexible tube to protect from damage.

  • jsv-lt12

    +
    JTR-DF21/24

    Disc Type (15A-50A)

    Existing air conditioning methods had loss of steam and early deterioration of the disks and sheets as major shortcomings caused by frequent operation. But this product ensures optimum operation thanks to the thermal insulation. The disk and sheet have undergone thermal processing to the stainless steel beams made of Martensite for greater durability and smooth operation. All the sealing parts have Teflon gaskets applied to prevent leakage. Even with disassembly and re-assembly for repair and maintenance, there is no disfiguration and thus the product can be used for an extended period of time. The built-in strainer prevents breakdowns caused by impurities. The maximum back pressure is 80% of the primary pressure. When selecting the size of the trap, select 2-3 times that of the required capacity. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    HTV35 Series

    Hyrogen Fuel Cell Vehicle Tank Solenoid valve

    Hyrogen Fuel Cell Vehicle에 적용되는
    초고압 용기용 전자제어식 밸브

    수소 연료 전지 자동차용 고압 용기 부속품으로 35Mpa에 적용 가능한 제품입니다.
    온도감응형 안전장치가 내장된 전자제어식 밸브로자동차 관리법 시행규칙 57조의 7 內 자동차용 내압용기 안전에 관한 규정 및 EC79, ECE R134에 준하여 설계되었습니다.
    "> Hyrogen Fuel Cell Vehicle에 적용되는
    초고압 용기용 전자제어식 밸브


    수소 연료 전지 자동차용 고압 용기 부속품으로 35Mpa에 적용 가능한 제품입니다.
    온도감응형 안전장치가 내장된 전자제어식 밸브로자동차 관리법 시행규칙 57조의 7 內 자동차용 내압용기 안전에 관한 규정 및 EC79, ECE R134에 준하여 설계되었습니다.

  • jsv-lt12

    +
    JST-YF11

    Y-Type

    This item is used to remove the scale and impurities from various pipelines. It is also attached to the front of various relief valves, control valves and steam trap devices to prevent errors or breakdowns in machinery caused by impurities. The screen has been designed with sufficient filtering surface, taking into account the undermined flow caused by the blockages triggered from impurities.

  • jsv-lt12

    +
    JAV-FF11

    This is an angled air vent which operates in the format of a ball float. The key parts are made of stainless steel for greater durability.

  • jsv-lt12

    +
    JDG-FT12/JDG-BT12
    JDG-NT12

    This device allows the staus of liquid flow to be verified with the naked eye from both sides to accurately see whether the steam trap works properly. Special reinforced glass is applied for greater resistance to pressure. For the flapper type and ball type products, you can verify the status of even the subtlest flow.

  • jsv-lt12

    +
    JCV-B100

    Applicable to the management system of storage and transportation equipment of cryogenic liquid, and pipe system of other cryogenic media, cryogenic ball valve's main features are flexible switch and reliable sealing. The product is mainly applied to output cryogenic media, such asethylene, liquid oxygen and LNG productions. The cryogenic ball valve is adapted to various pipelines to cut off or connect the media in pipes. The operating temperature and media is different according to the selected materials. The drive mode of cryogenic ball valve can be manual operation, worm drive, pneumatic or motor-drive.

  • jsv-lt12

    +
    JSV-PF100

    Pilot Operated Type

    It is used in various pressurized containers and gauging devices of oil & gas plants and petrochemical plants, and in particular as a substitute where spring load types cannot be installed.

    This product has acquired a capacity and quality certification from ASME ("UV" Stamp). It can be used in places where the bellows type cannot be used due to the excessive pressure, or where a large capacity valve is needed but there is not enough space. If can be used where the process requires a detection of pressure in one place while another place requires the outlet of liquids. It is also appropriate for cases where remote control is needed. For leakage, the API STD 527 standard applies."> It is used in various pressurized containers and gauging devices of oil & gas plants and petrochemical plants, and in particular as a substitute where spring load types cannot be installed.

    This product has acquired a capacity and quality certification from ASME ("UV" Stamp). It can be used in places where the bellows type cannot be used due to the excessive pressure, or where a large capacity valve is needed but there is not enough space. If can be used where the process requires a detection of pressure in one place while another place requires the outlet of liquids. It is also appropriate for cases where remote control is needed. For leakage, the API STD 527 standard applies.

  • jsv-lt12

    +
    JRV-SF31

    Direct Acting Type

    The direct impingement type pressure relief valve guarantees stable operation for small capacities as well as larger capacities. It can be applied to high pressure air, gas or liquid lines. By adopting pressure equalizing type of disk, there is minimal changes to the pressure on the secondary side caused by changes on the primary side. This allows for precise controls.

  • jsv-lt12

    +
    JTR-DT41

    Disc Type (15A-25A)

    The main body and sheet are of one piece, making it highly durable in high temperature and high pressure, and thus appropriate for steam engines or nuclear power generators. The structure is simple and repair is easy. The disk has undergone thermal treatment for increased hardness and greater durability. The thermal insulating cap was designed to prevent any impact from the exterior air. The built-in strainer prevents breakdowns or errors caused by impurities. When selecting the size of the trap, select one that is 3 times that of the necessary capacity for the trap. (This is dependent on the type of equipment and operational conditions.)

  • jsv-lt12

    +
    JST-YT42

    Y-Type

    This item is used to remove the scale and impurities from various pipelines. It is also attached to the front of various relief valves, control valves and steam trap devices to prevent errors or breakdowns in machinery caused by impurities. The screen has been designed with sufficient filtering surface, taking into account the undermined flow caused by the blockages triggered from impurities.

  • jsv-lt12

    +
    JAV-FT11

    The disk operates by the force of the spring, ensuring greater reliability of the operation. It has a small size, a simple structure and is also sturdy. The float helps the dispersion of the air flown in for stable operation and excellent emission of air.